Manufacturer: Hydro Flow
September 11, 2018
Have purchased Hydro Flow Premium Barbed Tees and Elbows to connect 1/2" (RB) Poly Drip Line. These 'Premium' Fittings are terrific. They have plenty 'Barb' plus plenty of 'Friction Room' on the fittings. My particular situation is somewhat unique. I'm running Drip Lines along a 500+ ft slope to supply Drip Fields under mature trees along a treeline. The intent is for a relatively permanent installation; hence I am also using PEX Ring Clamps at each connection, just to ensure extreme wx elements (and pressure) doesn't cause a connection to 'pop loose'. However upon testing several of these initial Fields I've built, I've discovered that Hydro Flow's 'Premium' Fittings fit so well that I didn't need to crimp a PEX Ring around them to test my Fields. This is somewhat surprising because many other types/brands I tried "Popped-Off" immediately as I applied water; and I'm only supplying a regulated 30 psi. Very happy with Hydo Flow 'Premium' Fittings.
Semi-aquatic mammal of action
June 02, 2018
On the one hand. I want to give these a good review, on the other hand, they did NOT work with my Rain Bird T63-500S Drip Irrigation 1/2" (.630" OD) Blank Distribution Tubing. Apparently 1/2 inch does not mean 1/2 inch. These fittings required hose clamps to work with this tubing, and even then they leaked. From more research, it looks like the tubing is at fault, so leaving this review so others know...
September 14, 2018
Purchased to route an A2W intercooler system. Fittings worked great and have held up as well as OEM
March 29, 2016
Worked great, cheaper than Home Depot.
June 05, 2019
No customer reviews
You must be logged in to post a review